The single column material testing machines are designed to test a wide range of materials such as Plastics, Rubber, Adhesives, Foils, Leathers, Textiles, Yarns, Ropes … in Tension – Compression – Flexion – Shear – Peel Tear…up to 5 kN of capacity.
FUNCTIONAL TECHNICAL CHARACTERISTICS
UNIT CONTROL
- PC Control and METROTEST Material Testing Software
- Sample breaking level (% force drop at end of test)
- Force and Extension Peak Maintenance in Tension or Compression
- Selection of units of force and deformation
- External control mode for 15 ” Laptop PC
- RS-232 serial port
FORCE MEASURE
- Range: 2% to 100% – Accuracy 0.5% of applied force
- Force Accuracy: Class 0.5 (accuracy ± 0.5%)
- Load Reading resolution: 1/200.000 points
1/100.000 in Tension
1/100.000 in Compression - Sampling Speed Force Data (internal): 30.000 S/second
- Units Selection: Kg – N or Lb
- Overload protection (Load Cell)
- Programmable pre-load
- High speed converter A/D of 18 bit
STROKE MEASURE
- Direct measurement from screw balls driving
- Single measurement range (1 scale)
- Reading resolution: 0,001 mm
- Self-return accuracy, better than ± 0.05 mm
- Selectable Units: Millimeters and Inches
- Programmable extension limits
SPEED TEST CONTROL
- Variable speed range (see table)
- Variable speed return within range (see table)
- Preset speed Resolution: < ± 0.02 mm / minute
- Speed accuracy: < ± 1%
- Pre-load speed variable within the range (see table)
- Power Protection System
- Drive by servo motor
