KUKLA has developed specifically a weighing- and dosing system for pre-chopped fiberglass. This weigh feeder is particularly used for the production of gypsum plasterboards and wherever pre-chopped fiberglass is used. By means of several weighing systems, a special back combing as well as a special combing brush the pre-chopped fiberglass is accurately fed to the process. An upstream discharge device (ASG) is used for pre-dosing the fiberglass, which can be directly discharged from a Big-Bag. All weighing, dosing and control functions are performed by one KUKLA-weighing electronics. Each standard scale of KUKLA is equipped with a test weight device which makes possible a quick and easy check of weighing accuracy within a few minutes. An integrated, weight-loaded belt steering- and tensioning device guarantees a high accuracy and high reliability.
Significant Benefits
- Test weight for an easy and quick check of the weighing accuracy
- Integrated belt steering and tensioning device
- Completely closed system
- Minimal maintenance works
- Material-friendly
Requirement
- Stable vibration-free subconstruction
Conveying material: pre-chopped fiberglass
Conveying capacity: 5 kg/h up to 3000 kg/h
Belt speed: depending on the set point and the belt load
Belt width: 300 mm up to 800 mm
Bulk density: 300 kg/m³ up to 1500 kg/m³
Fibre length: 5 mm up to 21 mm
Inclination: hoizontal up to 8 degrees increasing or decreasing
Adjustment range: 1:10 (upgradeable up to 1:50 with feedback-encoder)
ATEX: versions available
Accuracy: ± 1,0%
No photo is available for this product